Prest Mac

CONTROLADORES DE TENSÃO – EUA

CT 330 P/E

Description
  • The voltage controller mod. CT-330 that seeks to facilitate the installation and calibration of the system in the field, with input to 2 load cells.

  • Power: 100..260Vca – 45..65Hz – 100VA consumption.

  • Front panel: Membrane keyboard. Display – BACKLIT LCD type, 4×20.

  • Output: Pneumatic (CT-330P) = 0…7bar. (CT-330E) = 0..10V or 4..20mA or (others).

  • Modes of Operation: Free – Manual – Automatic.

  • Calibration Modes: Complete – Zero Compensation.

  • External control: Auto – Manual – Free – Incrementa – Decrementa.

CD 30 P/E Processor

Description
  • The CD-30 Prest Mac model voltage controller was developed for easy installation and operation, combined with precise voltage control.

  • The processor uses the principle of measuring the diameter of the coil through a digital laser sensor.

  • Simple installation and operation that free the operator for other critical tasks on the machine.

  • Dispenses with machine modifications avoiding system contact with material

  • Low cost of investment and maintenance.

  • Power: 100..260Vca – 45..65Hz – 100VA.

  • Check out: 0 to 10VCC, or 0 to 7 bar

  • Modes of Operation: Free – Manual – Automatic.

LASER SENSOR LAPM 30

Description
  • LAPM-30 Laser Distance Measurement Sensor

  • Purpose : To measure the diameter of the Coil

  • Measuring range 200 to 2000mm

  • Power: 24 Vdc

  • Output : 0 to 10Vdc

  • Dimensions and Fastening : View details

MTD-10

MTD-10

Description
  • Analog voltage meter, with digital indication.

  • Power supply for 1 pair of load cells

  • Input for 1 pair of load cells.

  • Output 0-10VDC, proportional to the measured voltage.

  • Power 127/220VAC – 50/60Hz.

  • Standard box DIN 98 x 48.

MTD-20

MTD-20

Description
  • Digital voltage meter, microprocessed.

  • Power supply for 1 pair of load cells

  • Input for 1 pair of load cells.

  • Independent 0-10VDC and 4-20mA outputs, proportional to the measured voltage.

  • MODBUS RTL interface.

  • Optional HMI 3.5″.

  • Power 24VDC

  • Standard box DIN FDO 18, dim 105x75x55mm, rail DIN35.

CTD-20

CTD-20

Description
  • Digital voltage controller, microprocessed

  • Power supply for 1 pair of load cells

  • Input for 1 pair of load cells.

  • 0-10Vdc and 4-20mA outputs, independent, For controlling the adjusted set point.

  • MODBUS RTL Interface.

  • Optional HMI 7″ – can be placed up to 4 controllers

  • to control up to 4 systems controlled by the CT 340

  • 24Vdc power supply.

  • DIN FDO 18 standard box, dim 105x75x55mm, for DIN35 rail.

PMB

PMA

Description
  • Electric load cell for measuring range of 5,10,20 and 30 Kgf

  • For tension measurement working with Strain gauges

  • For shaft diameter: 15 mm adjustment g6

  • Can be fixed on the sides of the machines

  • Works with our CT 330 P/E processor

  • CT 330 P – Can control brakes and pneumatic equipment with entry from 6 bar and output from 0 to 6bar

  • CT 330 E – Can control Frequency Inverters and other electrical devices output 1 to 10VDC.

  • Universal Power supply: 85…264 VAC/ 47…63 Hz.

PMB

PMB

Description
  • Electric load cell for measuring range of 50,100 and 150 Kgf

  • For tension measurement working with Strain Gauges

  • For shaft diameter: 25 mm adjustment g6

  • Can be fixed on the sides of the machines

  • Works with our CT 330 P/E processor

  • CT 330 P – Can control brakes and pneumatic equipment with entry from 6 bar and output from 0 to 6 bar

  • CT 330 E – Can control Frequency Inverters and other electrical devices output 1 to 10VDC.

  • Universal Power supply: 85…264 VAC / 47…63 Hz.

PMC

PMC

Description
  • Electric load cell for measuring range of 250 Kgf

  • For tension measurement working with Strain gauges

  • For shaft diameter:35 mm adjustment g6

  • Can be fixed on the sides of the machines

  • Works with our CT 330P/E processor

  • CT 330 P – Can control brakes and pneumatic equipment with entry from 6 bar and output from 0 to 6 bar

  • CT 330 E – Can control Frequency Inverters and other electrical devices output 1 to 10VDC.

  • Universal Power supply: 85…264 VAC / 47…63 Hz.

PML

PML

Description
  • Electric load cell for measuring range of 25/50/75 Kgf

  • For tension measurement working with Strain gauges

  • For shaft diameter: 15 mm adjustment g6

  • Can be fixed on the sides of the machines

  • Works with our CT 330P/E processor

  • CT 330 P – Can control brakes and pneumatic equipment with entry from 6 bar and output from 0 to 6 bar

  • CT 330 E – Can control Frequency Inverters and other electrical devices output 1 to 10VDC.

  • Universal Power Supply: 85…264 VAC / 47…63 Hz.

PMM

PMM

Description
  • Electrical load cell for measuring range from 250 to 5000 Kgf

  • For tension measurement working with Strain gauges

  • For shaft diameter: xx mm ( will be according to the bearings on existing rolls)

  • Can be fixed on the base or sides of the machines

  • Works with our CT 330P/E processor

  • CT 330 P – Can control brakes and pneumatic equipment with entry from 6 bar and output from 0 to 6 bar

  • CT 330 E – Can control Frequency Inverters and other electrical devices output 1 to 10VDC.

  • Universal Power Supply :85…264 VAC/ 47…63 Hz.

PMR

PMR

Description
  • Electrical load cell for measuring range from 200 to 2000 Kgf

  • For tension measurement working with Strain gauges

  • For shaft diameter: 40 mm adjustment g6

  • Can be fixed on the sides of the machines

  • Works with our CT 330P/E processor

  • CT 330 P – Can control brakes and pneumatic equipment with entry from 6 bar and output from 0 to 6bar

  • CT 330 E – Can control Frequency Inverters and other electrical controllers output 1 to 10VDC .

  • Universal Power Supply: 85…264 VAC / 47…63 Hz.

PMQ

PMQ

Description
  • Electric load cell for measuring range from 30 to 240 Kgf

  • For effort measurement working with Strain gauges

  • For shaft diameter: 25 mm adjustment g6

  • Can be fixed on the sides of the machines

  • Works with our CT 330P/E processor

  • CT 330 P – Can control brakes and pneumatic equipment with entry from 6 bar and output from 0 to 6bar

  • CT 330 E – Can control Frequency Inverters and other electrical controllers output 1 to 10VDC.

  • Universal Power Supply: 85…264 VAC / 47…63 Hz.

Rolar para cima